Niles Audio SW10WM manual SW10JM INSTALLATION - FLOOR APPLICATION CONTINUED

SW10JM INSTALLATION – FLOOR APPLICATION (CONTINUED)

	Floor	3" Screws	Cover
7. Install Trim Out Panel to protect cabinet
from debris until trim out using the			Hole Cut-out
supplied screws.

8. For trim out, remove Trim Out Panel.

9. Install the included floor grille into the cut-	Floor	3" Screws	Grille
out opening using the same screws from
the Trim Out Panel.			Hole Cut-out

OPTIONAL: The grille can be painted to match most decors but should be painted before installation. Additionally, paint the grille separately from the loudspeaker frame. For best results when painting the grille, use a spray gun or airless sprayer. Thin the paint to prevent clogging of the grille holes and apply several light coats instead of one heavy one.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI or 1-305-238-4373 9