Niles Audio SW10JM, SW10WM Floor Application - Complete Installation, New/Existing Construction

SW10JM INSTALLATION – FLOOR APPLICATION

FLOOR APPLICATION – COMPLETE INSTALLATION
New/Existing Construction		Floor
1. Use template to determine a suitable installation
location. Place the SW10JM cardboard template
in the desired location making sure the template	Template
is level and aligned correctly. You may want to
staple the template in place for added ease.

2a.Measure the width between the joists/studs and		Template
cut two 2 X 4s to match this width. The 2 X 4s
will be used to cross brace between joists.
2b.Position each 2 X 4 according to
template. Attach each 2 X 4 to the
floor joists using applicable local	X Minimum
building methods.			X
	Width Needed

XMinimum Width Needed

2 x 4

➊ Frame Cut-out ➌

3a.Mark 4 hole locations from template. This area will be used for the grille cutout.

➋ ➍

	Hole Cut-out
3b.Cut thru sub-flooring (OSB, PLYWOOD, ETC.)
between marks using appropriate tools.	Bottom View

(CONTINUED ON NEXT PAGE)

10