Niles Audio SW10JM, SW10WM manual Specifications, Wiring For New Construction

Models: SW10WM SW10JM

1 34
Download 34 pages 15.86 Kb
Page 30
Image 30
SPECIFICATIONS

WIRING FOR NEW CONSTRUCTION

For best results, avoid running speaker wire near AC wiring, as it may induce a 60Hz hum in the audio signal. It’s a good idea to run the speaker wire after the electrical wiring has already been completed, so that you can route the speaker wire at least three feet away from the electrical wiring. If speaker wire and AC wiring must run parallel, install the wire within a metal conduit.

NOTE: THE SW10WM IS DESIGNED FOR INTERIOR INSTALLATIONS BETWEEN STANDARD STUD CONSTRUCTION. INSTALLATION IN OUTDOOR LOCATIONS OR IN MOISTURE-PRONE INTERIOR ENVIRONMENTS SUCH AS INDOOR SWIMMING POOLS OR SAUNAS IS NOT RECOMMENDED.

SPECIFICATIONS

Frequency Response:

SW10JM: 38Hz - 140Hz +/-3dB

SW10WM: 45Hz - 140Hz +/-3dB

Amplifier Power:

SW10JM: For use with SWA-500M only

SW10WM: For use with SWA-500M only

Overall Dimensions (with grille)

SW10JM Joist Mount Subwoofer: 30" W x 9" H x 13.81" D

76.2cm W x 22.9 cm H x 35.1 cm D

SW10WM Wall Mount Subwoofer: 13.780" W x 46.298" H x 3.248" D

35 cm W x 117.6 cm H x 8.25 cm D

Weight

SW10JM Joist Mount Subwoofer: 57.3 lbs (25.8 kg) shipping weight

SW10WM Wall Mount Subwoofer: 47.8 lbs (21.7 kg) shipping weight

28

Page 30
Image 30
Niles Audio SW10JM, SW10WM manual Specifications, Wiring For New Construction