Niles Audio SW10WM manual SW10JM INSTALLATION - FLOOR APPLICATION, Pre-ConstructionFloor

SW10JM INSTALLATION – FLOOR APPLICATION

FLOOR APPLICATION – BEFORE FINAL FLOORING APPLIED

Pre-ConstructionFloor

1. Use template to determine a suitable installation location. Place the SW10JM cardboard template in the desired location

making sure the template is level andTemplate aligned correctly. You may want to staple the template in place for added ease.

2a.Measure the width between the joists/ studs and cut two 2 X 4’s to match this width. The 2 X 4’s will be used to cross brace between joists.

2b.Position each 2 X 4 according to template. Attach each 2 X 4 to the floor joists using applicable local building methods.

Template

X Minimum

Width Needed

X Minimum	2 x 4
	X
Width Needed

➊ Frame Cut-out ➌

3a.Mark 4 hole locations from template. This area will be used for the grille cutout.

3b.Cut thru sub-flooring (OSB, PLYWOOD, ETC.) between marks using appropriate tools.

➋ ➍

Hole Cut-out

Bottom View

NILES AUDIO CORPORATION – 1-800-BUY-HIFI or 1-305-238-4373 7