Nilfisk-Advance America SR 1700D 2W D Technical Data, Packing, General Checks, Machine Layout

Models: SR 1700D 2W D

1 84
Download 84 pages 29.03 Kb
Page 43
Image 43
PACKING

USER MANUAL GENERAL CHECKS

Before handling the machine, the route from where the vehicle is parked to where the machine is to be installed should be checked beforehand for any danger areas.

NOTE

Check that the floor is not too uneven, avoid driving the vehicle at high speeds, and avoid excessive swaying of the transported machine.

WARNING!

It is forbidden to get onto the machine, or stand or walk under it.

Lift the machine or the boxes as needed to handle the machine.

PACKING

Packing should be disposed according to the law in force.

INSTALLATION

When delivered, the machine is completely assembled and perfectly working, so it does not require any installation by the customer.

GENERAL CHECKS

Make sure the machine has been inspected before delivery (check the warranty).

Check that the machine has not suffered any damage during transportation and carry out the preliminary operations for setting the machine at work according to the instructions in the manual.

Check the hydraulic system oil level in the tank.

Check the brake fluid level.

Check the engine oil level.

Check radiator coolant level.

Refuel.

Start the machine.

Follow the maintenance instructions.

TECHNICAL DATA

USE

The SR 1700 2WD D sweeper has been designed to perform a complete cycle of industrial and urban cleaning: sweeping, waste collecting and dumping.

NOTE

Any use other than the one described can damage the machine or injure the operators.

The sweeping is carried out by one or more side brooms which convey the debris towards the centre of the machine and a cylindrical main broom sweeps the collected debris into the hopper. The dust is collected and controlled by a fan. The air released into the environment is filtered by a filter. The waste collected in the hopper may be dumped onto the ground or into special boxes at a maximum height of 1,510 mm.

MACHINE LAYOUT

(See Fig. E)

1.Fan

2.Side broom

3.Hydraulic system oil tank

4.Steering wheel with power steering

5.Fuel tank

6.Drive hydraulic motor

7.Blower

8.Rear wheel

9.Frame

10.Engine

11.Drive hydraulic pump

12.Main broom hydraulic motor

13.Main broom

14.Accessory hydraulic pump

15.Dust suction filter

16.Hopper

17.Front wheels

18.Side broom hydraulic motor

33014815(1)2005-07 A

5

Page 43
Image 43
Nilfisk-Advance America SR 1700D 2W D Technical Data, Packing, General Checks, Machine Layout, See Fig. E, User Manual