Periodical Checks

USER MANUAL

	Every 10	After 50	Every 150	Every 300	Every 500	Every	Every
Maintenance						1,000	2,000
	hours	hours	hours	hours	hours
						hours	hours

Hydrostatic pump hydraulic oil filter replacement

V belt check

Oil filter element replacement

Fuel filter element replacement

Hydrostatic pump hydraulic oil filter replacement

Fuel screw and fitting tightening

Injector check

Glow plug check

Engine air cleaner replacement

Fuel tank cleaning

Alternator belt replacement

Hydraulic oil change

Starter brush replacement

Hydraulic motor and pump pressure check

Sealing gasket wear check

Brake system check

Moving part clearance check

Battery

WARNING!

Wear gloves and goggles.

Check the electrolyte level.

Check the battery poles for oxidation.

Clean the entire surface of the battery with a damp sponge.

Tyre pressure

Front wheels

Recommended pressure: 7 Bar

Rear wheels

Recommended pressure: 7 Bar

Fluid levels

Brake fluid:	DOT4
Hydraulic oil:	AGIP Arnica 46
Engine oil:	AGIP Sigma Turbo 15W/40 K180

Coolant level

Mixture:

50% AGIP antifreeze and 50% water

Skirt closing adjustment

–Loosen the locknut (1, Fig. M).

–Adjust the fastener, making sure that the skirt closing panel closes hermetically.

–Adjust the skirt spring pressure with the mounting screw (2, Fig. M).

Parking brake adjustment

–Loosen or pull the nut (1, Fig. N) avoiding to move the cable end.

–Adjusting the cable tension, make sure the brake is not locked.

Air cleaner replacement

–Unscrew the mounting screw (1, Fig. O) and remove the cover (2).

–Unscrew the air cleaner (2, Fig. P) setscrew (1).

–Remove, clean or replace the air cleaner.

–Unscrew the element (2, Fig. Q) setscrew (1).

–Remove, clean or replace the element.

–Reinstall the cover and tighten the screw.

Gear pump hydraulic oil filter replacement

–Empty the oil tank through the plug at the bottom.

–Remove the tank cover (1, Fig. R).

–Unscrew the filters (1, Fig. S) from their seats inside the tank.

–Screw the new filters into place using the appropriate wrench (50) and reinstall the tank cover.

–Screw the drain plug.

–Check the oil level and top it up if necessary.

WARNING!

Do not pollute the environment with used oils and filters.

Variable delivery pump hydraulic oil filter replacement

1.Unscrew the mounting screw.

2.Unscrew the filter (1, Fig. T) and place it in a container for special waste. Replace it with an original filter.

WARNING!

Do not pollute the environment with used oils and filters.

14	33014815(1)2005-07 A

SR 1700D 2W D specifications

The Nilfisk-Advance America SR 1700D 2W D is a robust and efficient ride-on scrubber designed for commercial and industrial cleaning applications. This machine stands out for its versatility and effectiveness, addressing the cleaning needs of a wide range of environments, including warehouses, manufacturing facilities, and retail spaces.

One of the main features of the SR 1700D is its dual brush system, which provides excellent cleaning performance on various floor surfaces. With a cleaning width of up to 34 inches, it can cover large areas quickly, reducing the time spent on cleaning tasks. The machine is equipped with two cylindrical brushes that rotate at high speeds, effectively removing dirt and debris while ensuring that surfaces are thoroughly scrubbed.

The SR 1700D is designed with user comfort and ease of operation in mind. Its intuitive controls allow operators to easily adjust settings such as brush pressure and water flow, minimizing the learning curve for new users. The spacious operator compartment ensures comfort during prolonged use, allowing staff to clean effectively without fatigue.

Technology plays a crucial role in the SR 1700D's design. Its eco-friendly cleaning solution management system allows users to optimize water and detergent usage, reducing environmental impact and operating costs. The machine also features a high-capacity recovery tank, which enables extended cleaning sessions without the need for frequent emptying.

Durability is another key characteristic of the SR 1700D. Constructed with high-quality materials, it is built to withstand the rigors of daily use in demanding environments. The machine's design incorporates protective features, such as impact-resistant bumpers, ensuring longevity and reducing maintenance needs.

In terms of mobility, the SR 1700D is equipped with robust wheels and a tight turning radius, allowing it to navigate through tight spaces and around obstacles with ease. This makes it an ideal choice for facilities with complex layouts.

Overall, the Nilfisk-Advance America SR 1700D 2W D is a powerful and efficient solution for commercial cleaning needs. Its combination of performance, user-friendly features, and advanced technology makes it a valuable asset for any organization looking to maintain cleanliness and hygiene in their facilities.

Nilfisk-Advance America SR 1700D 2W D manuel dutilisation Periodical Checks

Models: SR 1700D 2W D

hours