USER MANUAL
Stability
Machine stability depends on the conditions in which it is used.
If the machine is used within the conditions of use specified in the manual, it is stable.
To this end, the following tests were carried out under the same conditions on a prototype identical to the series model and no stability problems arose. The conditions were:
Flat ground with good surface conditions:
–Transfer maximum speed: 14 km/h
–Working speed: from 1 to 8 km/h
–Bending radius (maximum speed of 14 km/h): 3 m
–Bending radius (speed of 5 km/h): 0 m.
On sloping ground with good surface conditions and maximum longitudinal slope of 20%:
–Bending radius (maximum speed of 5 km/h): 3 m
–Bending radius (speed of 1 km/h): 0 m. Maximum crossfall while in transfer: 15%. Maximum crossfall, at 5 km/h: 20%.
The tests were carried out with lowered and empty hopper. For different conditions of use, the machine operator should be able to assess the limits of the machine,
and should, in any case, follow the indications laid down in the manual.
Information on brooms
Side brooms (2, Fig. E)
–Polypropylene side broom
–Polypropylene and steel side broom
–Steel side broom
–Nylon side broom
Main brooms (13, Fig. E)
–Natural fibre and polypropylene main broom
–Polypropylene main broom
–Polypropylene and steel main broom
–Nylon main broom
Brooms with a moplen shaft or with different bristles can be supplied on request.
SAFETY SYSTEMS
The machine is provided with:
–An operator's seat sensor that stops the machine as soon as the operator leaves the seat;
–A safety lever on the joystick to avoid accidental wrong operation.
MAIN TECHNICAL DATA
General data | Values |
Sweeping system | Mechanical suction |
|
|
Loading system | Front |
Sweeping range with one side broom | 1,300 mm |
|
|
Sweeping range with two side brooms | 1,700 mm |
Collection width | 1,000 mm |
|
|
Standard hour working capability | 21,000 m2/h |
Main broom length | 994 mm |
|
|
Main broom diameter | 380 mm |
Engine | Lombardini LDW1003 |
|
|
Broom motor | Hydraulic |
Drive motor | Hydraulic |
|
|
Suction motor | Electric 12 V |
Drive type | Hydrostatic |
|
|
Gradeability | 20% |
Maximum drive speed | 15 Km/h |
|
|
Dust filters | Polyester |
Filtering surface | 8.5 m² |
|
|
Hopper | Front |
Capacity | 360 litres |
|
|
Dumping type | Multilevel |
Dumping height | 1,510 mm |
|
|
Lifting type | Hydraulic |
|
|
Overall dimensions | Values |
Length | 2,500 mm |
|
|
Width | 1,350 mm |
Height | 1,570 mm |
|
|
Weight in running conditions | 1,280 Kg |
|
|
Diesel engine | Values |
Make | Lombardini |
|
|
Type | LDW1003 |
Cylinders | 3 |
|
|
Displacement | 1,028 cm³ |
Bore | 75 mm |
|
|
Stroke | 77.6 mm |
Compression ratio | 22.8 : 1 |
|
|
Maximum speed | 3,600 rpm |
Maximum speed (in running condition) | 2,450 rpm |
|
|
Maximum power | 15 kW |
Battery | 12 V 80 Ah |
|
|
7 |