MAINTENANCE
Remove the cap from the engine oil emptying hose and let the oil come out.
Note: it is suggested to remove the oil when the engine is warm.
Dispose of the used oil in proper special containers.
Note: keep the emptying hose lifted and open during filling.
Take a funnel and pour in the new oil (type indicated in the engine Use e Maintenance booklet) from the hose of the rod for oil level check. Fit the rod for oil level check and close the emptying hose with its cap.
At the end of the filling sequence check the engine oil level.
Make a periodic check of the engine air filter.
If necessary wash the engine air pre- filter (A) with water and soap or any other detergent for domestic use.
Squeeze it and dry it well.
Proceed by cleaning the filter B with compressed air (pressure not higher than 6 bar).
If the filter can’t be completely cleaned, replace it.
Fit the engine air filter in its compartment and the relevant cover.
B |
A |
22
