NEPTUNE 5 FA

5 Applications and methods

5.1Techniques

5.1.1 Soaking

5.1.2 Detergent and Foam

5.1.3 Temperature

5.1.4Mechanical Effect

5.1.5High Water Flow or High Pressure

Effi cient high pressure cleaning is achieved by following a few guide- lines, combined with your own personal experience of specifi c clean- ing tasks. Accessories and detergents, when correctly chosen, can increase the effi ciency of your pressure washer. Here is some basic information about cleaning.

Encrusted or thick layers of dirt can be loosened or softened up by a period of soaking. This is for example an ideal method within agricul- ture – for example, within pig sties. The ideal soaking method can be achieved by using foam or simple alkaline detergent. Let the product lie on the dirty surfaces for about 30 minutes before pressure wash- ing.The result will be a much quicker high pressure cleaning process.

Foam or detergent should be applied onto dry surfaces so that the chemical product is in direct contact with the dirt. Detergents are ap- plied from bottom to top, for example on a automobile bodywork, in order to avoid “super clean” areas, where the detergent may collect in higher concentrations and streams downwards. Let the detergent work for several minutes before rinsing before rinsing and never let it dry on the surface being cleaned.

Detergents are more effective at higher temperatures. Greases, oils and fats can be broken down more effectively at higher temperatures also. Proteins can be cleaned at temperatures of around 60°C (140°F). Oils and traffi c fi lm around 70°C (158°F), and grease can be cleaned at 80°-90°C (176-194°F).

In order to break down tough layers of dirt, additional mechanical effect may be required. Special lances and rotary or wash brushes offer this supplementary effect that cuts through dirt.

High pressure is not always the best solution and may also damage surfaces. The cleaning effect also depends upon water fl ow. Pres- sure levels of around 100 bar (1450 psi) may be suffi cient for vehicle cleaning (in association with hot water) and higher fl ow levels give the ability to rinse and flush away large amounts of dirt easily.

1) Options / model variants

11

Original instructions

Page 13
Image 13
Nilfisk-ALTO 107400337 C operating instructions Applications and methods