Manuals / Nilfisk-ALTO / Household Appliance / Vacuum Cleaner

Nilfisk-ALTO 46/53 manual Operation Of Controls And Gauges

Models: 46/53

1 49

Download 49 pages 30.77 Kb

Page 21

OPERATION OF CONTROLS AND GAUGES

	OPERATION OF CONTROLS AND GAUGES
	WARNING
	BANK
CHARGING SYSTEM	RECOVERY
LIGHT	HIGH
	LIGHT
	CLOGGED
	FILTER LIGHT
SOLUTION	HOPPER
LOW LIGHT	TEMP
	LIGHT
C1636batt	FIGURE 15

WARNING BANK (See Figure 15)

The Warning Bank is located on the instrument panel and provides the operator with fault/status indicators for engine and sweeper systems. The operator should monitor the indicators while sweeping. It is very important that the operator be familiar with the meaning of each indicator.

CHARGING SYSTEM LIGHT

The charging system light illuminates to indicate a charging system fault. When this occurs the machines charging system is not working properly, have the machine serviced by a qualified service technician.

CLOGGED FILTER LIGHT (Option)

The clogged filter light illuminates to indicate that the dust control filter is clogged. When this occurs, stop the machine and use the filter shaker to clear the dirt and debris from the filter. After using the filter shaker, continue sweeping.

HOPPER TEMPERATURE LIGHT (Option)

When the temperature of the air moving through the hopper dust control system exceeds 140° F, an automatic protection feature shuts down the dust control fan and illuminates the hopper tem- perature light. When this occurs, shut down the machine and carefully investigate for a possible fire in the hopper, then manually reset the switch.

SOLUTION LOW LIGHT

The solution low warning light will illuminate when the solution tank is empty, indicating the end of the scrubbing cycle.

RECOVERY HIGH LIGHT

The recovery high warning light will illuminate approximately 5 minutes before the recovery tank is full, giving ample time to complete the scrubbing cycle, before the mechanical float shuts off the

vacuum to the recovery tank.

American-Lincoln	1-21
ATS 46/53 Battery

Image 21

Nilfisk-ALTO 46/53 manual Operation Of Controls And Gauges

Contents

PARTS LIST ATS 46/53 BATTERYAmerican-Lincoln Technology OPERATOR’STABLE OF CONTENTS ATS 46-53BatteryAmerican-Lincoln SERVICE CHART ATS 46/53 BatterySERVICE PRECAUTIONS SERVICE INSTRUCTIONSCHAPTER 3 OPTIONS DIMENSIONS CLEANING PATHWEIGHT TRAVEL SPEEDSQUEEGEE WARRANTYTANKS HOPPERATS 46/53 Battery MACHINE DIMENSIONSAmerican-Lincoln 65.41 cmSTANDARD HARDWARE & TORQUE VALUES The torque tolerance is ± on torque valuesHYDRAULIC TORQUE REQUIREMENTS Fraction DECIMAL-METRICCONVERSION TABLEDecimal MillimeterPREPARING THE MACHINE FOR OPERATION MACHINE PREPARATIONSAFETY INSTRUCTIONS DANGERREAD THE INSTRUCTION BOOK ATS 46/53 Battery American-Lincoln1-13 ATS 46-53Battery 1-14American-Lincoln LIGHT SWITCH See Figure OPERATION OF CONTROLS AND GAUGESHORN BUTTON See Figure METER HOURCONDITION KEY SWITCH See FigureHOPPER SAFETY LOCK ARM See Figure FILTER SHAKER SWITCH See FigureTO ENGAGE THE SAFETY ARM C1700MAIN BROOM ADJUSTMENT See Figure SIDE BROOM ADJUSTMENT See figureSIDE BROOM LEVER MAINSWITCH SCRUB DECK SWITCHDUST CONTROL SWITCH See Figure SCRUB DECK SWITCH See FigureNON-RECYCLINGOR STANDARD SCRUBBING SYSTEM SOLUTION CONTROL See FigureRECYCLING OR ESP & AUTOFIL SYSTEM TO DISCONNECT WATER HOSEOPERATION OF CONTROLS AND GAUGES FOOT PEDAL PARKINGBRAKE FOOT PEDAL ACCELERATORHOPPER DUMP DOOR LEVER - See Figure HOPPER LIFT LEVER - See FigureSWITCH TURN SIGNALSWITCH TURN SIGNAL - 4-WayOption See FigureC1718 C1719FILTER PANEL LATCH See Figure FRONT COVER LATCH See FigureMAIN BROOM COMPARTMENT DOORS See Figure HYDRAULIC RESERVOIR LEVEL SIGHT GAUGEMAIN BROOM COMPARTMENTHOPPER DOOR LEVER See Figure HOPPER LIFT LEVER See FigureHOPPER FILTER COVER See Figure SOLUTION LEVEL WARNING LIGHT THE ESP RECYCLING SYSTEM ON/OFF SWITCHTHE ESP RECYCLING CONTROL PANEL See Figure DETERGENT LOW WARNING LIGHTDETERGENT TANK SOLUTION TANK SOLUTION TANKRECOVERY RECOVERYORIFICE STARTING BATTERY MACHINES PRE-STARTCHECKLISTSWEEPING AND DUST CONTROL SYSTEMS-HOWTHEY WORK DUST CONTROLBATTERY CHARGING INSTRUCTIONS POST-OPERATIONCHECKLISTSTORAGE FOR BATTERY-POWEREDMACHINES EMPTYING THE DEBRIS HOPPERMAIN AISLE HELPFUL HINTS FOR CLEANING OPERATION50 HOUR WEEKLY MAINTENANCE CHECKLIST SERVICE CHART100 HOUR MAINTENANCE CHECKLIST 250 HOUR MAINTENANCE CHECKLISTPage SERVICE PRECAUTIONS SERVICE PRECAUTIONSADJUSTING THE MAIN BROOM HEIGHT SWEEPING SYSTEM SERVICE MAIN BROOMMAIN BROOM LEVEL ADJUSTMENT CHECKING THE MAIN BROOM SWEEP PATTERNADJUSTING THE SIDE BROOM HEIGHT SIDE BROOM SERVICESIDE BROOM SERVICE SIDE BROOMCLEANING THE HOPPER HOPPER SERVICECLEANING THE DUST CONTROL FILTER HOPPERDUST FLAPS REPLACING THE DUST CONTROL FILTERADJUSTING THE BRAKE PEDAL BRAKE SERVICEADJUSTING THE BRAKES BRAKESCLEANING THE HYDRAULIC SYSTEM GENERAL MACHINE MAINTENANCEFILL HYDRAULIC RESERVOIR FILLING THE HYDRAULIC RESERVOIRRECOVERY HIGH WARNING LIGHT SOLUTION LOW WARNING LIGHTSOLUTION CONTROL Non-Recyclingor Standard SOLUTION CONTROL Recycling or ESP SystemADJUSTING CASTERS To service the bladesRECYCLING PUMP ESP SYSTEM RECYCLING PUMP STORAGEBATTERY PARTS LIST LEGEND ABBREVIATIONS - SCREWSABBREVIATIONS - SETSCREWS PROBABLE CAUSE PROBLEMREMEDY GENERAL TROUBLESHOOTINGPROBABLE CAUSE PROBLEMREMEDY 1. Worn scrubbing brushesORDERING PARTS