Nilfisk-ALTO 46/53 Sweeping And Dust Control Systems-Howthey Work, Before Starting The Machine

Models: 46/53

1 49
Download 49 pages 30.77 Kb
Page 31
Image 31
SWEEPING AND DUST CONTROL SYSTEMS-HOW THEY WORK

OPERATING INSTRUCTIONS

SWEEPING AND DUST CONTROL SYSTEMS-HOW THEY WORK

ATS 46/53 machines are equipped with a sweeping and dust control system. (See Figure 34)

DUST CONTROL

C1731

FIGURE 34

BEFORE STARTING THE MACHINE

1.Set parking brake.

2.Make sure all controls are in the “OFF” position.

3.Be sure the directional control switch is in the center position.

4.Ensure the batteries have been fully charged and serviced (see battery service instructions).

NOTE

Before starting the machine, perform the pre-start checklist.

PRE-START CHECKLIST

1.Check hydraulic fluid level.

2.Check all systems for leaks.

3.Check brakes and controls for proper operation.

4.Check broom patterns.

5.Check to ensure that all covers, panels and access doors are securely closed.

STARTING BATTERY MACHINES

Starting the battery powered models is accomplished by turning the key switch to the “I” (on) position. It is important to note that the batteries should be fully charged and serviced prior to using the machine.

American-Lincoln

1-31

ATS 46/53 Battery

 

Page 31
Image 31
Nilfisk-ALTO 46/53 manual Sweeping And Dust Control Systems-Howthey Work, Before Starting The Machine, Pre-Startchecklist