Nokia 6010 warranty PIN code request, PUK Codes, Security Code

PIN code request

You can activate the PIN code request to prevent unauthorized use of your phone. If you set the PIN code request to On, your phone will ask for the code each time you turn the phone on. When the phone is locked, calls still may be possible to the official emergency number programmed into your phone.

ACTIVATE

1Select Menu > Settings > Security settings > PIN code request.

2Enter the PIN code supplied by your service provider and select OK > On > OK.

DEACTIVATE

1Select Menu > Settings > Security settings > PIN code request.

2Enter the PIN code supplied by your service provider and select OK > Off > OK.

Change

You can change your PIN or PIN2 code to any 4-digit to 8-digit number. You must activate the PIN code request first. See “PIN code request” on page 64.

1Select Menu > Settings > Security settings > Change access codes > Change PIN code.

2Enter the current PIN code, select OK, enter the new PIN code, and select OK.

3Enter the new PIN code again to verify and select OK.

Note: If you make a mistake while entering the code, Code Error appears. Start again at step 2 and be careful to enter the correct code. If you enter the wrong code three times in a row, the PIN code is blocked. To unblock the PIN code, you need a personal unblocking key (PUK) from your service provider.

•PUK CODES

The PUK and PUK2 codes are 4-digit to 8-digit codes that usually come from your service provider along with the SIM card. The PUK code unblocks a blocked PIN code, and the PUK2 code unblocks a blocked PIN2 code.

If you block your phone, contact your service provider. When you enter the PUK code given by your service provider, the phone prompts you to enter and then confirm a new PIN code.

•SECURITY CODE

The default security code is 12345. Nokia recommends that you change the default code immediately.

64 Copyright © 2004 Nokia