3Push the card gently to lock it into place. Close tight the slot door (3).
Remove a memory card
Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.
1Press briefly the power key.
2Scroll to Remove memory card, and select OK > Yes.
3Open the memory card slot door.
4Push the card gently to release it.
5Pull the card out, and select OK.
6Close the slot door.
Charge the battery
1Connect the charger to the wall socket.
2Connect the charger plug to the charger connector in the device.
G e t s t a r t e d
If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.
The charging time
depends on the charger and the battery used.
Switch the device on and off
Press and hold the power key.
If the device asks for a PIN code, enter the
PIN code, and select OK.
If the device asks for the lock code, enter the lock code, and select OK. The factory setting for the lock code is 12345.
For more information about access codes, see "Access codes", p. 20.
To set the correct time zone, time, and date,
select the country you are presently in, then enter the local time and date. See also "Clock", p. 67.
