C a m e r a
Location information
With geotagging, you can add information about the geographic location where the image was captured to the file details of the photograph. You can use this information in other applications.
To activate geotagging in the camera, select Options > Settings > Record location > On.
When the location information is added to the image
information, 
is shown at the bottom of the display. If no positioning information is available from satellites, 
is displayed.
If the location information is not available, GPS stays on in the background for a few minutes. If a satellite connection is found within that time, all the images captured during that time are tagged based on the received GPS positioning information. See "Still image camera settings", p. 54.
After capturing an image
After you capture an image, select the following from the active toolbar (available only if Show captured image is set to On in still image camera settings):
•To send the image, press the call key, or select Send ( 
).
•To send the image to a compatible online album, select Sign in for Share online (
).
•To open the Gallery, select Go to Gallery ( 
).
•If you do not want to keep the image, select Delete ( 
).
•To use the image as wallpaper in the standby mode, select Options > Set as wallpaper.
•To set the image as a call image for a contact, select Options > Set as contact call img..
Capture images in sequence
You can set the main camera to capture six images or more in a sequence. In the active toolbar, select Sequence mode
>Burst. To capture images, press the camera key. To capture more than six images, press and hold the camera key. The number of images captured depends on the available memory.
To use a time interval between capturing images, select Sequence mode and a time interval. To start capturing images, press the camera key. To stop capturing images before the time ends, press the camera key again.
After you have captured the images, they are shown in a grid on the display. To view an image, press the scroll key to open it.
You can also use the sequence mode to capture up to six images using the
To return to the sequence mode viewfinder, press the camera key.
