When you open Maps, the capital city of the country you are in or the location that was saved from your last session is shown. The map of the location is also downloaded, if needed.
To establish a GPS connection and zoom in to your last known location, press 0, or select Options > My position.
A GPS indicator 
on the bottom right of the display shows the availability and strength of the satellite signal. One bar indicates one satellite. When the device receives enough data from the satellite to establish a GPS connection, the bar turns green. Your device must receive signals from at least four satellites to calculate the coordinates of your location. After the initial calculation, signals from three satellites may be enough.
To zoom in or out, press * or #. To move on the map, use the scroll keys. A new map is automatically downloaded if you scroll to an area which is not covered by maps already downloaded. See "Download maps", p. 34. The maps are free of charge, but downloading may involve the transmission of large amounts of data through your service provider's network. For more information on data transmission charges, contact your service provider. The maps are automatically saved in the device memory or on a compatible memory card (if inserted).
P o s i t i o n i n g
Find locations
To find a location in the city or area displayed on the map, enter the full or partial address of the location in the search field, and press the scroll key. To find a location in another city, enter the city and the address, and select Search.
To find a specific address, select Options > Search > Addresses. Country/Region * and City or post code are mandatory.
To browse through places and attractions by categories in your area, select Options > Search > Places, and a category.
To find an address saved in Contacts, select Options > Search > Addresses > Options > Select from Contacts.
Save and send locations
To save a location to your device, press the scroll key, and select Add > To places.
To send a location to a compatible device, press the scroll key, and select Send. If you send the location in a text message, the information is converted to plain text.
