Nokia 6340 Setup voicemail with dialing codes, Learn HOW to Insert Dialing Codes, Dialing codes

LEARN HOW TO INSERT DIALING CODES

Press repeatedly to cycle through dialing codes. Once the desired code appears, pause briefly to insert the code into your dialing string.

For example, press four times to display “w” (wait character). Pause briefly to insert the wait character into your dialing string. Available dialing codes are as follows:

Dialing codes

	*	Bypasses a set of instructions
	+	Precedes an international telephone number
8
	p	Pauses for 2.5 seconds before sending any numbers that follow
	w	Wait. Your phone waits for you to press	before it sends any
		numbers or codes that follow.

Setup voicemail with dialing codes

1At the Start screen, press Names, scroll to 1-touch dialing, and press Select.

2Scroll to an empty 1-touch dialing slot and press Assign.

3Enter your voice mailbox number, including the area code.

4Refer to the table entitled “dialing codes,” and enter any codes as necessary using the information that you wrote down earlier.

For example, if you pause for 5 seconds after connecting to voicemail, enter p twice after the voice mailbox number, such as 2145551212pp.

5Enter any remaining pauses, PIN codes, and other information that allows you to listen to your messages, then press OK.

6Enter a name (such as Voicemail) and press OK. A message appears in the display confirming your 1-touch dialing location has been saved.

Now, to dial and listen to your voicemail, just press and hold the assigned 1-touch dialing key at the Start screen. No other keypresses should be necessary.

[ 44 ]