Nokia 6340 specifications Receive a TTY call, Optional Headsets, Connect the headset

Receive a TTY call

1Make sure the TTY and phone are connected.

2When the phone vibrates (if vibrate is on), press to answer the call, and then type your response on the TTY.

3To hang up, press on the phone.

•OPTIONAL HEADSETS

The HDC-9P and HDE-1 headsets can be purchased separately as accessories.

Connect the headset

1Plug the headset jack into the accessory connection on the bottom end of your phone.

2Place the round headset ear plug in your ear.

10	With the headset connected, you can make,
	answer, and end calls as usual.

•Use the keypad to enter numbers

•Press to place a call

•Press to end a call

When in use, the headset microphone hangs at the side of your head. Although it may seem far from your mouth, you can speak at normal volume.

VOICE DIAL A NUMBER WITH THE HDC-9P HEADSET

Once you’ve voice tagged entries in your Phone book, you can make a call with the HDC-9P headset by simply pressing and holding the remote button on the microphone. See “Assign a voice tag” on page 51 for information on setting up voice tags if you haven’t already.

1At the Start screen, press and hold the remote button on the headset. Your phone beeps and Please speak now appears in the display.

2Within 3 seconds, pronounce the voice tag into the microphone.

Once the voice tag is recognized, the tagged entry appears in the display, replays through the earpiece, and the number is dialed.

[ 64 ]