Nokia 6340 specifications Connect TTY hardware, Make a call with TTY, End a TTY call

Customize your phone

Note: If the loopset is enabled, you’ll be asked to disable the loopset before enabling TTY/TDD. Press Yes to disable the loopset (thus enabling TTY/TDD). Press No to leave the loopset enabled.

Connect TTY hardware

1The TTY device comes

with a cable. Plug the larger end of this cable into the input jack on the TTY.

2 Plug the other end of the cable into the TTY adapter HDA-8.

3Plug the HDA-8 into

the connector on the	10
bottom of your phone.

Make a call with TTY

Note: You must have a an accessory attached to your phone prior to selecting the accessory settings menu.

1At the Start screen, press Menu 4-6-4-1-1(Settings - Accessory settings - TTY/TDD - Use TTY - Yes). After a brief pause, a confirmation message appears in the display.

Note: After selecting Yes, this becomes the default and you won’t have to do it again unless you turn TTY/TDD off.

2Press to return to the Start screen.

3Enter the number you wish to call (on the phone) and press .

4When the receiving party answers, begin typing your conversation on the TTY.

End a TTY call

•Press on the phone

[ 63 ]