Nokia 7160 manual Network feature setting, Call forwarding, Storing the feature code

Network settings

Network feature setting

This menu allows you to enable or disable various network services (Call Forwarding, Call Waiting, Send Own Caller ID) through the use of special feature codes provided to you by your service provider.

You must first store the feature code given to you by your service provider (unless already pre-programmed) before the feature appears in the menu or functions properly.

Important! Only those menu features that have been activated will appear in the menu; therefore the menu shortcuts in the following sections may not always reflect the actual position in the menu as described below (or as shown on page 16).

Storing the feature code

1.Press Menu 4-5-3 (Settings - Network services - Network feature settings), then press Select.

2.Enter the feature code for the desired feature (for example: -

- to activate Call Forwarding, then press Select.

3.To locate the type of Call Forwarding associated with the code, press Select, or use the Navi roller and scroll to Call waiting or Send own caller ID when calling, and press Select.

4.Select the command associated with the feature code you wish to store (Activate, Cancel, Yes or No) and press Select to complete the process.

Call forwarding

This network service allows you to forward your incoming calls to another number (for example, your office number). For more information and feature codes, contact your service provider.

Once you activate this feature by entering the proper feature code, you can select one of the following forwarding modes: Forward all calls, Forward calls if number busy, Forward calls if not answered, Forward

calls if out of reach or phone is off, and Cancel all call forwarding. See

“Call forwarding” on page 37 for a description of the features listed above.

[ 91 ]