Basic components of the handset
15
Copyright © 2005 Nokia. All rights reserved.
This key activates the following functions from the standby
display:
XPress to switch off loudspeaker.
An incoming call is indicated by a flashing display.
XPress and hold to put the car phone in off mode. Press again
to return to the standby di splay.
XPress to switch incoming or ongoing calls from your car
phone over to a compatible, paired headset and back as
desired.
This key activates the follo wing voice functions from th e
standby display:
XPress to activate voice dialling and voice commands.
XPress and hold to activate recording (also during ongoing
calls).
Alphanumeric keypad
Use these keys to enter numbers 0-9, letters, and other
characters. Several characters have been assigned to each key.
To enter a character, repeatedly press the related key until you
have reached the desired character.
Entering numbers and characters:
XTo enter a number, press and hold the number key for
approximately one second.
XTo enter special characters, repeatedly press .
XTo enter a blank space, press .
XTo switch between upper- and lower-case characters, press
.
XUse the Navi wheel to move the cursor in the entered
text.
For example, if you wish to enter the letter “C”, press three
times. When the flashing cursor app ears to the right of the
letter entered, you can select the next character to be entere d.
Repeat these steps until you have completed your entry.
Note
The procedure set out above applies only for entering
text.
Caution!
When you have finished using the handset, make sure
that it is placed securely in the cradle. A loose handset
may cause bodily injury if you have to brake sharply or
should have an accident.