Voice
45
Copyright © 2005 Nokia. All rights reserved.
New voice commands
This option allows you to r ecord a voice command (o ne or more
words acting as a spoken command) and assign it to a function
in the list of voice commands.
XWith the display in standby, press .
XScroll to Voice, and press .
XScroll to Voice commands, and press .
XScroll to New voice command, and press .
XScroll to the desired function for which you wish to record a
voice command, and press .
XPress again and you are prompted to speak the voice
tag you have selected for this entry.
XFollow the instructions on the display.
The voice command list includes the phone functions listed for
voice commands. Each function on the list can be checked and
edited using the options below:
yPlay voice commands
This option plays the voice command as recorded.
yChange
You can record a new voice command for a selected entry,
replacing the existing one.
yDelete voice command?
This option erases a voice command and makes room in the
memory for a new one.
Before using voice commands, note that:
yVoice commands are not language dependent. They are
dependent on the speaker's voice.
yVoice commands are sensit ive to background noise. Rec ord
them and make calls in a quiet environment.
yYou must say the command exactly as you said it when you
recorded it.
yVery short commands are not accepted. Use long commands
and avoid similar commands for di fferent functions.
You can use a shortcut to access the list of voice commands
direct from the standby display:
XPress , and scroll left.
XYou can now view the list of Voice commands.
XFollow the instructions on the display.
Execute a voice command
Note
When an application using the GPRS connection sends
or receives data, you cannot execute a voice command.
To do so, you must first end the application using the
GPRS connection.
To execute a voice command: