Nokia N95 manual Mail settings, If you select Multimedia retrieval Always, Settings E-mail

Messaging	Outside your home cellular network, sending and
	receiving multimedia messages may cost you more.
	If you select Multimedia retrieval > Always
	automatic, your device automatically makes an
	active packet data connection to retrieve the
	message both in and outside your home cellular
	network.
	● Allow anon. msgs. — Select whether you want
	to reject messages from an anonymous sender.
	● Receive adverts — Define whether you want to
	receive multimedia message advertisements.
	● Receive report — Select whether you want the
	status of the sent message to be shown in the log
	(network service).
	● Deny report sending — Select whether you
	want to deny your device sending delivery
	reports of received messages.
	● Message validity — Select how long the
	message centre resends your message if the first
	attempt fails (network service). If the message
	cannot be sent within the validity period, the
	message is deleted from the message centre.
	E-mail settings
	Manage mailboxes
	Press , and select Messaging > Options >

112 Settings > E-mail.

To select which mailbox you want to use to send e- mail, select Mailbox in use and a mailbox.

To remove a mailbox and its messages from your device, select Mailboxes, scroll to the desired mailbox, and press C.

To create a new mailbox, in Mailboxes, select Options > New mailbox. The name you give to the new mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes. Select Mailboxes and a mailbox to change the connection settings, user settings, retrieval settings, and automatic retrieval settings.

Connection settings

Press	, and select Messaging > Options >
Settings > E-mail >		Mailboxes, a mailbox, and
Connection settings.

To edit the settings for the e-mail you receive, select Incoming e-mail, and from the following:

●User name — Enter your user name given to you by your service provider.

●Password — Enter your password. If you leave this field blank, you are prompted for the password when you try to connect to your remote mailbox.

●Incoming mail server — Enter the IP address or host name of the mail server that receives your e-mail.