Nokia N95 manual GPS receiver, About satellite signals, Satellite status

Positioning server > Access point. A wireless LAN access point cannot be used for this service. The packet data internet access point is asked when GPS is used for the first time in your device.

To enable or disable different positioning methods, such as Bluetooth GPS, press , and select Tools > Settings > General > Positioning > Positioning methods.

GPS receiver

The GPS receiver is located in the bottom of the device. When using the receiver, slide the numeric keypad open, and from an upright position, move the device to an angle of about 45 degrees, with an unobstructed view of the sky. Do not cover the numeric keypad with your hand.

Establishing a GPS connection may take from a couple of seconds to several minutes. Establishing a GPS connection in the car may take longer.

The GPS receiver

draws its power from the device battery. Using the GPS receiver may drain the battery faster.

About satellite signals

If your device cannot find the satellite signal, consider the following:

●If you are indoors, go outdoors to receive a better signal.

●If the numeric keypad slide is closed, open it.

●If you are outdoors, move to a more open space.

●Ensure that your hand does not cover the GPS antenna of your device. See "GPS receiver," p. 87.

●If the weather conditions are bad, the signal strength may be affected.

●If the power saver turns on on the display while the device is attempting to establish a GPS connection, the attempt is interrupted.

●Establishing a GPS connection may take from a couple of seconds to several minutes.

Satellite status

To check how many satellites your device has found, and whether your device is receiving satellite signals, press , and select Tools > Connectivity > GPS data > Position > Options > Satellite status. If your device has found satellites, a bar for each satellite is shown in the satellite info view. The longer the bar, the stronger the satellite signal. When your device has

Positioning (GPS)

87