Nokia N95 manual Lighting, Video settings, Exposure compensation images

Camera	● Rotate image — Select whether you want the
	image to be rotated upright when you open it in
	Gallery.
	● Restore camera settings — Select Yes to return
	the default values to the camera settings.
	Setup settings—adjust colour and
	lighting

To enable the camera to reproduce colours and lighting more accurately or to add effects to your pictures or videos, scroll through the active toolbar, and select from the following options:

●Flash mode ( ) (images only) — Select the desired flash mode.

●Colour tone ( ) — Select a colour effect from the list.

●White balance ( ) — Select the current lighting condition from the list. This allows the camera to reproduce colours more accurately.

●Exposure compensation ( ) (images

only) — If you are shooting a dark subject against a very light background, such as snow, adjust the exposure to +1 or +2 to compensate the background brightness. For light subjects against a dark background, use -1 or -2.

●Sharpness ( ) — Adjust the sharpness of the

72image or video image.

●Contrast ( ) — Adjust the difference between the lightest and darkest parts of the image or video image.

●Light sensitivity ( ) (images only) — Increase the light sensitivity in low light conditions to decrease the risk of images that are grainy or too dark. Higher sensitivity may increase the graininess of the images.

The screen display changes to match any settings you make so that you see how the change affects the pictures or videos.

The available settings vary depending on the selected camera.

The setup settings are camera specific; if you change the settings in the secondary camera, the settings in the main camera do not change. The setup settings do, however, transfer between the image and video modes. The setup settings return to the default settings when you close the camera. If you select a new scene, the colour and lighting settings are replaced by the selected scene. You can change the setup settings after selecting a scene if needed.

Video settings

To change the main settings, in the video mode, select Options > Settings and from the following: