Nokia N95 manual Infrared, Remote SIM mode

Connections	through Bluetooth connectivity are indicated by
	.
	Remote SIM mode
	Before the remote SIM mode can be activated, the
	two devices must be paired and the pairing initiated
	from the other device. When pairing, use a 16-digit
	passcode, and set the other device as authorised.

To use the remote SIM mode with a compatible car kit enhancement, activate Bluetooth connectivity, and enable the use of the remote SIM mode with your device. Activate the remote SIM mode from the other device.

When the remote SIM mode is on in your device, Remote SIM mode is displayed in the standby mode. The connection to the wireless network is

turned off, as indicated by in the signal strength

indicator area, and you cannot use SIM card services or features requiring cellular network coverage. When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls while in this mode, except to the emergency numbers programmed into your device. To make calls from your device, you must leave the remote

40 SIM mode. If the device is locked, enter the lock code to unlock it.

To leave the remote SIM mode, press the power key, and select Exit remote SIM mode.

Infrared

With infrared, you can transfer data (such as business cards, calendar notes, and media files) with a compatible device.

Do not point the infrared (IR) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.

To send and receive data using infrared, do the following:

1.Ensure that the infrared ports of the sending and receiving devices are pointing at each other, and that there are no obstructions between the devices. The distance between the two devices is not more than 1 meter (3 feet).

2.The user of the receiving device activates the infrared port.

3.To activate the infrared port of your device to receive data through infrared, press , and select Tools > Connectivity > Infrared.

4.The user of the sending device selects the desired infrared function to start the data transfer.