Nokia N95 manual Software updates, Settings, Access codes, Useful

information	Software updates
	Nokia may produce software updates that may offer
	new features, enhanced functions, or improved
	performance. You may be able to request these
	updates through the Nokia Software Updater PC
Useful	application. To update the device software, you
	need the Nokia Software Updater application and a
	compatible PC with Microsoft Windows 2000, XP, or
	Vista operating system, broadband internet access,
	and a compatible data cable to connect your device
	to the PC.
	To get more information and to download the Nokia
	Software Updater application, visit www.nokia-
	asia.com/softwareupdate or your local Nokia
	website.
	Tip: To check the software version in your
	device, enter *#0000# in the standby
	mode.

Settings

Your device normally has MMS, GPRS, streaming, and mobile internet settings automatically configured in the device, based upon your network service provider information. You may have settings from your service providers already installed in your

16 device, or you may receive or request the settings

from the network service providers as a special message.

You can change the general settings in your device, such as language, standby mode, display, and keypad lock settings. See "General

settings," p. 143.

Access codes

If you forget any of the access codes, contact your service provider.

●Personal identification number (PIN) code — This code protects your SIM card against unauthorised use. The PIN code (4 to 8 digits) is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it.

●UPIN code — This code may be supplied with the USIM card. The USIM card is an enhanced version of the SIM card and is supported by UMTS mobile phones.

●PIN2 code — This code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your device.

●Lock code (also known as security code) — This code (5 digits) can be used to lock the device to avoid unauthorised use. The factory setting for the lock code is 12345. To avoid unauthorised