NordicTrack VGR 850 Assembly requires two persons, Packing materials, Ubber mallet Pliers

ASSEMBLY

Assembly requires two persons.		Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials.	Do not dispose of the packing materials until assembly is completed.
Assembly requires the following tools: the included allen wrench, a phillips screwdriver				,
an adjustable wrench		, a r ubber mallet	, and pliers	.
As you assemble the elliptical exerciser, use the drawings below to identify the small parts used in assembly.
The number in parentheses below each drawing refers to the key number of the part, from the PART LIST on
page 16. The second number refers to the quantity used in assembly.			Note: Some small parts may have been
pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached.

		M4 x 19mm	M4 x 16mm
M6 Nylon	M10 Nylon	Flange Screw	Screw (34)–5
Locknut (17)–2	Locknut (29)–6	(16)–6

M6 x 16mm Button	M10 x 25mm	Button	M10 x 45mm Button
Head Bolt (54)–2	Head Screw	(42)–2	Head Bolt (59)–2

Handlebar Spacer (39)–2 Pedal Arm Spacer (41)–2*

3/4” Axle Cap (43)–4* 5/8” Axle Cap (57)–2* Weld Spacer (49)–2

5