NordicTrack VGR 850 user manual Battery clip, Be careful not to pinch the wires

4.Attach the two Wheel Brackets (38) to the Frame (1) with the two M10 x 25mm Button Head Screws (42) as shown.

Attach a Wheel (61) to each Wheel Bracket (38) with an M10 x 45mm Button Head Bolt (59) and an M10 Nylon Locknut (29).

5.Route both Pulse Wires (15) into and up through the Upright (3) as shown.

Attach the T-handle (10) to the Upright (3) with two M6 x 16mm Button Head Bolts (54) and two M6

Nylon Locknuts (17).

6.The Console (6) requires two “AA” batteries (not included). Alkaline batteries are recommended. To install batteries, turn the console over. Remove the four M4 x 16mm Screws (34), and separate the Console from the Console Base (14). Insert two bat- teries into the battery clip as shown in the inset draw- ing. Make sure that the negative ends of the bat- teries (marked “—”) are touching the springs in

the battery clip.

Attach a Plastic Tie (9) to the battery clip as shown.

Attach the Console (6) to the Console Base (14) with the four M4 x 16mm Screws (34), making sure that the indicated wires are extending from the Console Base.

Be careful not to pinch the wires.

4
61		59
		29
		42
		38
59
		1
5
		3
		54
		15
		10
		17
6	6	Batteries
		9
		Battery
14		Clip
Wires
		34

7