nector. Additional screws may be added if required.

e. Cut away along edge of flange allowing the center to drop into the duct. Remove section of duct with caution, as edges will be sharp.

INSTALLING FINGER TABBED DUCT CON- NECTORS

a.Place duct connector through the floor open- ing with bottom tabs extending through the duct opening. (See Figure 9)

b.Secure duct connector to floor.

c.Bend bottom tabs under and up tightly against the supply air duct (See Figure 10).

NOTE: The duct connector is designed for use on ducts 12" in width. When using the connec- tor on 12" wide ducts, there may be insufficient clearance to bend the tabs on two sides of the duct connector. In such cases the tabs may be

attached to the sides of the duct by using sheet metal screws or other suitable fasteners. (See Figure 11).

If sealant, mastic, or tape is used to provide a better seal, it should be approved by applicable national or local codes.

ALTERNATE ATTACHMENT METHODS

This procedure may also be used to install a furnace duct connector to narrow metal ductwork where insufficient clearance prevents bending of the duct connector tabs at the side(s) of the duct. (See Figure 12).

1.Score and cut the top of the metal duct as indicated in Step 1 or Step 2. With Step 1 choice, also cut out the metal from the shaded area “A”.

2.Fold the duct flap “B” up, (See Step 3).

TABS

TABS

DUCT

DUCT

1. INSERT DUCT PLENUM CONNECTOR

2. BEND BOTTOM TABS OVER

INTO DUCT CUT-OUT.

AND ONTO THE UNDERNEATH

 

DUCT SERVICE.

Figure 10. Installation of Duct Connector

Duct Connector

Duct

Narrow Duct

 

Figure 11. Narrow Duct Installation

 

 

 

STEP 1.

 

STEP 2.

 

Fold Back Flap "B"

Fold Back Flap"B"

 

 

Cut- Out

"B"

Area "A"

"A"

"A"

 

"B"

Cut- Out Area"A"

Cut Lines

"B"

"B"

Duct

Top of Duct

Fold Back Flap "B"

Bend Duct Connector Tabs Up and Over- (along length of duct)

Fold Back Flap"B"

Staple Folded Duct

Flap (typ) to side of Duct

Connector

STEP 3.

Duct

Duct

 

Flap "B"

STEP 4.

 

Duct

Figure 12. Alternate Installation

12

Page 12
Image 12
Nordyne M3RL installation instructions Installing Finger Tabbed Duct CON- Nectors, Alternate Attachment Methods

M3RL specifications

The Nordyne M3RL is a high-efficiency gas furnace designed for residential heating applications, characterized by its robust performance and advanced technologies. It is part of Nordyne's distinguished lineup, which emphasizes reliability and comfort in home heating systems. The M3RL model is particularly notable for its focus on energy efficiency, making it an attractive option for homeowners looking to reduce their energy expenses while maintaining optimal heating levels.

One of the standout features of the Nordyne M3RL is its high Annual Fuel Utilization Efficiency (AFUE) rating, which often exceeds 80%. This efficient design ensures that more of the fuel consumed is converted into usable heat for the home. By employing a variable-speed blower, the M3RL enhances comfort by allowing for more precise control over air circulation, contributing to better temperature consistency throughout the living space.

The M3RL utilizes advanced multi-stage heating technology, allowing the system to operate at different capacities depending on the heating demand. This means it can run at lower settings during milder weather, which not only saves energy but also reduces wear and tear on the equipment, extending its lifespan. The furnace also includes a reliable ignition system that ensures quick and safe starts, eliminating the inefficiencies associated with older pilot light systems.

Another important characteristic of the Nordyne M3RL is its acoustical insulation, which minimizes operational noise. The quiet operation is particularly valued in residential settings, where noise pollution can be disruptive. Additionally, the furnace features a compact design, making it easy to install in a variety of spaces, including tight basements or utility rooms.

The M3RL model is also equipped with a smart control system that interfaces seamlessly with modern thermostats, offering homeowners the ability to program their heating schedules and optimize energy usage. This integration with smart home technology positions the M3RL not just as a heating solution, but as a component of a more comprehensive home energy management system.

In conclusion, the Nordyne M3RL gas furnace represents a blend of efficiency, advanced technology, and user-friendly features. Its high AFUE rating, multi-stage heating capability, quiet operation, and smart technology integration make it a reliable choice for homeowners aiming to enhance their comfort while minimizing energy costs. This furnace is a testament to Nordyne's commitment to innovation in the HVAC industry.