Chapter 4 Installing option cards and DIMMs 61
Removing the front bezel and top cover
To install option cards or DIMMs, you must remove the front bezel and the top cover from the gateway.
To remove the front bezel:
1Shut down the VPN Router 2700 using the Web GUI or the CLI and then unplug it as described in “Shutting down the system to add or replace hardware” on page 60.
Warning: Risk of electric shock
Turn off the VPN Router 2700, and unplug the power cord before you attempt to remove or install an option card or DIMM.
2Use a Phillips screwdriver to turn each of the two screws on the front bezel a quarter turn counterclockwise (Figure 20).
Figure 20 Removing the front bezel
CS260015B
3Grip the two handles, and firmly pull the bezel toward you to unsnap it from the chassis.
Caution: Risk of equipment damage
Do not use the piece with the Nortel Networks logo and the LEDs as a handle.
