Chapter 1 Installing the Nortel VPN Router 2700 chassis 29

Installing the chassis

To install the VPN Router 2700, do one of the following:

Position the chassis on a flat, sturdy, horizontal surface.

Mount the chassis in a standard equipment rack (see “Installing the chassis in an equipment rack” on page 30).

Installing the chassis on a flat surface

If you decide to place the VPN Router 2700 on a flat surface, make sure that the surface is large enough for the gateway and sturdy enough to support the combined weight of the VPN Router 2700 and the cables that you attach to it.

The VPN Router 2700 accessory kit includes four rubber feet that can be attached to the bottom of the gateway. Figure 2 shows the placement of these rubber feet.

Figure 2 Placement of rubber feet on the bottom of the chassis

Attach feet (4)

CS160016A

Nortel VPN Router Installation — VPN Router 2700

Page 29
Image 29
Nortel Networks 2700 manual Installing the chassis on a flat surface