68 Chapter 4 Installing option cards and DIMMs

6Remove the filler panel screw, and pull out the filler panel (or the option card that you are replacing) from the slot (Figure 24).

Figure 24 Installing and removing an option card

Rear of unit

Filler panel screw

 

Option card

Motherboard

Option card slots

CS2600017A

7Lower the new option card into the slot, and gently press the connector into the slot.

Seat the card firmly in the slot. If you do not seat the card properly, it does not work.

8Replace the screw that secures the card to the slot (Figure 24).

9Replace the top cover on the chassis (Figure 21 on page 62). a Hold the cover at an angle and slide it onto the chassis.

NN46110-311 02.01

Page 68
Image 68
Nortel Networks 2700 manual Installing and removing an option card