Nortel Networks BCM1000 Initializing the hard disk (single-disk system, BCM 3.0)

182 Chapter 16 Replacing the hard disk
N0008587 01
Initializing the hard disk (single-disk system, BCM 3.0)
The BCM1000 is normally initialized at the factory. However, if you have to replace the hard drive
in a single-disk BCM1000, you must re-initialize the Business Communications Manager.
After you replace the hard disk and the system has booted up, perform the initialization as follows:
1Enter the terminal emulation program, as described in “Finding the configuration menus” on
page 128.
The Platform Initialization Menu appears. Refer to Figure 84.
Figure 86 Platform Initialization Menu screen
2Enter 1 (Initialize Menu) and press <ENTER>.
The Initialize Menu appears. Refer to Figure 87.