Nortel Networks quick start Initializing CallPilot 100/150 using a telephone, Outdial Method

12Initializing CallPilot 100/150 using a telephone

Table 3 Quick Install Wizard parameters for a CallPilot 100/150

Field name	Description
Outdial Method	Select the outdial method you want to assign to the mailboxes created using the From Extension
	and To Extension boxes. You can choose None, Line, Pool or Route.
	If you select None, no outdial method is assigned to the mailboxes.
	If you select Line, click the Outdial Method text box and enter the line number of the line you want
	assign to the mailboxes.
	If you select Pool, click the Outdial Method text box and enter the line pool number of the line
	pool you want to assign to the mailboxes.
	Note: Line pool numbers 0 to 15 correspond to the Line Pools A to O on the KSU programming
	interface.
	If you select Route, click the Outdial Method text box and enter the route number of the route you
	want to assign to the mailboxes.

4Click the Install button.

You can now start programming the CallPilot parameters. For information about how to program CallPilot, refer to the CallPilot Manager Set Up and Operation Guide.

Note: If you have changed any of the IP addresses or the Subnet Mask, you must reboot the CallPilot 100/150 before you start programming the CallPilot 100/150 parameters.

Initializing CallPilot 100/150 using a telephone

To initialize CallPilot 100/150 you need to:

•determine the CallPilot 100/150 Feature Codes

•configure the CallPilot 100/150 initial parameters

N0008008 02