CallPilot Message Networking User Guide 11
Sending a message using Direct Addressing
Direct Addressing lets you send a voice message to a mailbox at a different location on a network. To use Direct Addressing you must know the destination site phone number and the mailbox number of the person you want to send a message to. Direct Addressing is available for AMIS only.
Ask your System Administrator for the destination site’s phone number and mailbox numbers.
To send a message using Direct Addressing -
Norstar Voice Mail
Pswd:
OTHR RETRY OK
0 new | 4 saved |
PLAY REC | ADMIN |
Record message:
Record message:
RETRY PAUSE OK
Accept rec?
RETRY PLAY OK
Mbox:
DIRQUIT
Address type?
NETWAMIS
Ph:
RETRY OK
Destmb:
RETRY OK
AMIS msg
OPTS CC OTHR
Network msg
VIEW SEND
0 new 0 saved
PLAY REC ADMIN
1Press ≤·°⁄.
Follow the voice prompts or the display button options to open your mailbox.
2Enter your mailbox password and press OK or £.
3Press REC or ‹.
4At the tone, record your message.
The message you record must be longer than three seconds. The system times out after five seconds of silence.
5Press OK or £ to end the recording.
6Press OK or £ to accept the recording.
7Press ££.
8Press AMIS.
9Enter the destination site phone number and press OK.
10Enter the destination mailbox number and press OK.
11Press OTHR to review or send the message or
press OPTS to assign message Certified, Urgent, or Timed Delivery options
or
press CC to send the message to another recipient.
12Press SEND to transmit the message.
13Press ®to end the session.
CallPilot Message Networking User Guide
