CallPilot Message Networking User Guide 13
Replying to network messages
You can reply to a network message using the Reply Feature. You must have the network Reply Feature enabled in order to reply to a message. For more information, ask your System Administrator.
To reply to a network message -
Norstar Voice Mail
1 new | 4 saved |
PLAY REC | ADMIN |
End of message
REPLY ERASE NEXT
Reply netwrk msg
MSGQUIT
Reply to:
SNDRALL
1Open your mailbox using ≤·°⁄.
Follow the voice prompts or the display button options to open your mailbox.
2Press PLAY or ¤to play your new messages or
press flto listen to your saved messages.
3After you listen to the message, press REPLY.
4Press MSG.
5Press SNDR to send your reply to the sender or
press ALL to send your reply to all the people that received the message.
Record message:
Record message:
RETRY PAUSE OK
Accept rec?
RETRY PLAY OK
Networkmsg
OPTS CC SEND
Will deliver
6Record your reply message.
The message you record must be longer than three seconds. The system times out after five seconds of silence.
7Press OK to end your recording.
8Press OK to accept your recording.
If you are using digital networking, the display in step 10 appears. If you are using AMIS, go to step 11.
9Press SEND to send the message or
press OPTS to assign message Delivery Options Certified, Urgent or Timed Delivery
or
press CC to send the message to another recipient.
CallPilot Message Networking User Guide
