Nortel Networks P7000 Taking a Closer Look: Playback Zoom, Pictures Taken Using the Face Priority Function

Taking a Closer Look: Playback Zoom

Playback on More

Rotate the zoom control to g(i) in full-frame playback
mode (A30) to zoom in on the current picture,
enlarging and displaying the center of the picture.
• The guide at lower right shows which portion is enlarged.
The following operations can be performed while
pictures are zoomed in.		3.0
To	Use	Description	A
		Rotate the zoom control to g(i). The zoom
Zoom in	g(i)	increases up to about 10×. Zoom also increases	-
		by rotating the command dial to the right.
		Rotate the zoom control to f(h). When the
	f(h)	magnification ratio reaches 1×, the display
Zoom out		returns to full-frame playback mode.	-
		Zoom also decreases by rotating the
		command dial to the left.
Move the display		Press the rotary multi selector H, I, Jor Kto
		move the display area to other areas of the	12
area
		picture.
Return to full-frame	k	Press the kbutton.	30,
playback			115
Crop picture	d	Press to save the visible portion only as a	145
		separate file.
	c
Switch to the		Press the cbutton or shutter-release button	30
shooting mode		to enter the shooting mode.

Pictures Taken Using the Face Priority Function
When the zoom control is rotated to g(i) during full-
frame playback mode for pictures taken in Face Priority
(A86), the picture is enlarged with the face that was
detected during shooting at the center (excluding pictures
that were shot using Continuous (A99) or Auto	2.0
bracketing (A80)).

•If more than one face was detected, the picture is enlarged with the face that was focused on at the center of the monitor. Press the rotary multi selector H, I, J, or Kto display other faces that were detected.

•When the zoom control is further rotated in the g(i) or f(h) direction, the zoom ratio changes and becomes a normal playback zoom display.

118