Using the Flash

Setting the Flash Mode

1 Press the K(flash pop-up) button.

•Built-in flash is raised.

•When the built-in flash is lowered, the flash mode is fixed to W(Off ).

2 Press m(flash mode) on the rotary multi selector.

• The flash mode menu is displayed.

3 Use the rotary multi selector to choose the desired mode and press the kbutton.

• When the manual flash is chosen, choose the flash output with Jor Kbefore pressing the kbutton.

Auto

•The mode selected for the flash is displayed.

• When U(Auto) is applied, Dis only displayed for

a few seconds even if monitor indicators (A14) are turned on.

•If the kbutton is not pressed within a few seconds, the

selection is set and the setting menu disappears.

1/250

F5.6

32

 

BLowering the Built-in Flash

When not using the built-in flash, gently push to lower the flash until it clicks shut.

Mode (Auto) APlayback: and Photography Basic

33