Novatel user manual Chapter, Installation, Central Cable Mount, Open-EndedSMART ANTENNA Cable

Chapter 2 Installation

Figure 7: Central Cable Mount

Figure 7 shows the SMART ANTENNA with its cable exiting from the central cable mount, see also Figure 5, instead of using the connector shown in Figure 6 on Page 15.

Use the open-ended cable shown in Figure 8 to connect the SMART ANTENNA to auxiliary equipment. See Table 2 on Page 17 for the available variations of this cable.

Figure 8: Open-Ended SMART ANTENNA Cable

The SMART ANTENNA RS-232 multi-connector cable is shown in Figure 9 on Page 17 and is for RS-232 models only. The receiver end of the cable connects to the 7-pin (shown in Figure 6 on Page 15) or 6-pin receptacle of the RS-232 SMART ANTENNA. It provides up to three ends opposite the receiver end:

•+12 V DC automobile input power plug

•DB-9 socket connector to user-supplied PC

•open end for a user-supplied auxiliary connection

See Table 2 on Page 17 for the available variations of this cable.

16 SMART ANTENNA User Manual Rev 6