Novatel user manual Installation, Chapter, Multi-ConnectorSMART ANTENNA Cable, Cable Variations

Installation Chapter 2

Figure 9: Multi-Connector SMART ANTENNA Cable

Table 2: Cable Variations

Part Number	Serial	Length (m)	Number of Pins	Connectors at
	Interface		at Receiver End	Other End
217-601764-001	RS-422	5	12	None
217-601764-002	RS-422	30	12	None
217-601764-003	RS-422	15	12	None
217-601742-001	RS-232	5	7	None
217-601742-003	RS-232	5	7	DB-9 and a
				+12 V DC adapter
217-601798-001	RS-232	5	6	None
217-601798-003	RS-232	5	6	DB-9 and a
				+12 V DC adapter
217-601798-004	RS-232	15	6	DB-9 and a
				+12 V DC adapter

CAUTION

When installing the cable, use a tie-wrap near the antenna to hold the weight of the cable so that the connector is not stressed by the cable weight.

2.1.1.1Magnetic Mount Adaptor

A magnetic mount adapter (part number 270-990146-890), see Figure 10 on Page 18 is available as an accessory. Use this magnetic mount accessory to thread the antenna onto a mount and position on a flat surface (for example, on top of a vehicle).

SMART ANTENNA User Manual Rev 6 17