Novatel A.6 Multi-ConnectorSMART ANTENNA Cable, Technical Specifications, Appendix A

Technical Specifications Appendix A

A.6 Multi-Connector SMART ANTENNA Cable

This multi-connector cable for the SMART ANTENNA uses separate connectors for DC power (a 12 V DC automobile input power plug), for the primary data signals (a DB-9 connector), and for auxiliary signals (unterminated wires), see Figure 23. The pinout for the DB-9 connector is shown in Table 7. See also Table 2, Cable Variations on Page 17.

Figure 23: RS-232 6-Pin Multi-Connector SMART ANTENNA Cable

Table 7: DB-9 Connector Pinout

Pin #	Signal	Signal Direction
2	TX1	To host computer receive port.
3	RX1	From host computer transmit port
5	GND	N/A

See also the Multi-Connector SMART ANTENNA Cable on Page 17 and Table 6, Connector Variations on Page 41.

This multi-cable is not available for RS-422 SMART ANTENNA models.

SMART ANTENNA User Manual Rev 6 43