PRO
FEATURES,OPERATING, & ASSEMBLY INSTRUCTIONS...
9
8
7
6
5
4
1
2
3
1011
12
14
13
17
15
16
To fully appreciate the features of the PRO TT - 1, please read this entire manual before you begin operation. The PRO TT - 1 should be placed on a level sturdy surface. Keep in mind that there are a few features you may never have seen before on a turntable of this type that you will need to read about to use properly.
Start by removing all parts from the package and place on a level surface. Carefully check all packing material for hidden parts. Use the contents guide for reference.
Do not discard any packing materials!
1. Power Dial
On - Rotate Right
Off - Rotate Left
2.START/STOP - Pressing once engages high torque motor pressing again engages brake.
3.Platter Revolution Speed Buttons
33rpm - Press 33 45rpm - Press 45 78rpm - Press 33 and 45
4.Strobe Light - This Pulses a beam of light at the Strobe Dots (5). By doing so the large dots will seem not to move in Quartz Lock mode.
5.Strobe Dots - Four rows of dots that indicate various stages in pitch adjust.
+3.3% - next row
+6% - inner row
6.Platter - Place this on the Center Spindle (7) and carefully position with the Alignment Pins (17)
7.Center Spindle - Keeps platter and records centered. Place the supplied slipmat on the Center Spindle now.
- The Leader in DJ Technology
©1999 | Industries | 6 | http://www.numark.com |