Init Display First
This function on the PnP/PCI Configuration menu allows you to define if the initial display
is in the PCI slot or in the PCI Express slot.Options are [PCI Slot] and [PCIEx].
Reset Configuration Data
This function on the PnP/PCI Configuration menu allows you to enable or disable the
resetting of Extended System Configuration Data (ESCD) when you exit Setup.Set this to
[Enabled] if you have installed a new add-on and the system reconfiguration has
caused a serious conflict that prevents the OS from booting.The default setting is
[Disabled].
Resources Controlled By
This function on the PnP/PCI Configuration menu allows you to define if the BIOS can
automatically configure all the boot and plug-and-play compatible devices or if you can
manually select IRQ,DMA, and memory base address fields. Select [Auto(ESCD)] if you
want the BIOS to automatically populate these fields.If you select [Manual] so you can
assign the resources,IRQ Resources is enabled for input.
60
Installing and Configuring the BFG NVIDIA nForce 680i LT SLI Motherboard