RAID Configuration
2.A main menu screen will appear (Autorun feature)
3.Select the page “RAID floppy”
4.Insert a blank floppy into the A:drive
5.Click on the required driver to begin copy into the floppy
Step 4: Install O/S into RAID disk
Proceed to install Windows XP/2000/NT4.0. When installing the O/S from CD, press <F6> so that it will request for RAID driver. Insert the floppy created earlier in Step 3.
Step 5: Install Software utility for Windows
After the O/S has been installed, you may install the RAID driver and software. The RAID software is a
1)Insert the bundled CD into the
2)When the main menu appears, click on the RAID driver corresponding to the RAID controller you have configured in Step 2. See driver installation in section 6 for more details.
Note: For information on using the software utility, refer to the user guide in the bundled CD.
Page
