To setup the Special Media Stacker:
1From the rear of the printer, pull the stacker down and open the extender.
Media will feed to the rear, stacked face up.
Maximum capacity is 100 sheets of 20 lb paper.
Using the Front Tray with Multiple Sheets
If you are going to use the front tray to feed a stack of print media, you need to go into the menu and set the printer paper input default to the front tray:
1Press ON LINE. Printer goes offline.
2Press and release TRAY TYPE.
3Press ENTER.
4Press ©until FRONT TRAY appears on the display.
5Press ENTER to select FRONT TRAY.
An asterisk appears to indicate the new default setting.
6Press ON LINE to engage the setting and exit the menu.
!When printing using the front tray, be sure to set your software for front tray:
(1)Enter the printer setup menu on you computer.
(2)Select front tray or auto front feeder.
(3)Select the media type, size and orientation.
Handy Reference 15
