Memory card
This recorder uses two types of memory cards: a microSD card as internal memory, and an SD card as additional memory.
You can remove the content recorded in both the cards safely in case of malfunction of the recorder.
Compatible cards
The recorder supports memory card capacity from 512 MB up to 32 GB.
Cards compatibility
For a list of card compatible with the recorder, please visit the product homepage at the Olympus website applicable to your region or contact your Olympus reseller where you purchased the product.
Notes
•When initializing (formatting) a card, confirm that no necessary data is stored on the memory card beforehand. Initialization completely erases the existing data on the card.
•Cards formatted (initialized) by another device, like a computer, may not be recognized. Be sure to format them with this recorder before use.
•The card has a service life. When reaching the end of its life, writing or erasing data on the card will be disabled. In this case, replace the card.
•If you use a PC card adapter compatible with the card to save or delete some data on the card, the maximum recording time on the card may be decreased. To recover the original recording time, initialize/format the card in the recorder.
Inserting and ejecting a SD card
Inserting a SD card
Insert the SD card fully into the card slot with the card facing the direction shown in the illustration below, until it clicks into
place.1
•Insert the card keeping it straight.
Memory card
Card recognition
After inserting SD card, the message
[Please Wait] will flash on the display while the recorder recognizes the SD card.
Ejecting a SD card
Push the SD card inward to unlock it and let it come out of the slot.
•Hold the card straight and pull it out.
EN
15
