VIDEO OUT
You can select NTSC or PAL according to your TV’s video signal type.
You will need to set this when you want to connect the camera to a TV and play back images in a foreign country. Make sure the correct video signal type is selected before connecting the video cable. If you use the wrong video signal type, recorded pictures will not play back properly on your TV.
TV video signal types in major countries and regions
Check the video signal type before connecting the camera to your TV.
NTSC | North America, Japan, Taiwan, Korea |
|
|
PAL | European countries, China |
|
|
7
camera your Customizing
8
When set to [OFF], you can turn off the beep sound that is emitted when the focus locks by pressing the shutter button.
SLEEP
After a specified period of time elapses with no operations being performed, the camera enters the sleep mode
The camera activates again as soon as you touch any button (the shutter button, qbutton, etc.).
USB MODE
If you specify the device you are connecting to beforehand, you can skip the USB connection setting procedure normally required every time you connect the cable to the camera. For details on how to connect the camera to either device, refer to “Connecting the camera to a printer” (gP. 112) and “Connecting the camera to a computer” (gP. 117).
[AUTO]
The selection screen for the USB connection will be displayed every time you connect the cable to a computer or printer.
[STORAGE]
Allows you to transfer images to a computer. Also, select to use the OLYMPUS Master software via PC connection.
[MTP]
Set this to transfer images in Windows Vista/7 without using the OLYMPUS Master software.
[PRINT]
Can be set when connecting the camera to a
100
EN