Information

11

Using the electronic viewfinder (sold separately)

If you use the electronic viewfinder (sold separately: VF-2), you can view the shooting screen in the finder. This is convenient when you are in a very bright location, such as under direct sunlight, where it is difficult to view the monitor or are using the camera at a low angle.

Also refer to the electronic viewfinder’s manual.

1

Turn off the camera.

Accessory port

2

Slide off the hot shoe cover.

 

3

• Keep the shoe cover in a safe place to avoid losing it.

 

Remove the connector cover from the electronic

 

4

viewfinder.

 

Align the electronic viewfinder with the hot shoe

 

 

on the camera body, and slide it in until it stops.

 

 

• Insert the electronic viewfinder by pushing on its lower

 

5

part.

 

Turn on the camera.

 

6

Each press of the ubutton switches between

 

 

the monitor display and electronic viewfinder

ubutton

 

display.

 

• You can adjust the brightness and color temperature

 

7

of the electronic viewfinder. g“EVF ADJUST” (P. 102)

 

Turn the diopter adjustment ring to a position where the image on the viewfinder

8

can be seen clearly.

 

Adjust the viewfinder to your preferred angle (up to 90 degrees).

Diopter adjustment ring

xNotes on looking after the viewfinder

•You cannot use an external flash and the electronic viewfinder at the same time.

•When carrying the camera, do not hold it by the electronic viewfinder. The camera may separate from the electronic viewfinder and drop.

•Do not leave the camera with the electronic viewfinder attached in a location subject to direct sunlight.

132

EN