Exposure warning display

If the optimum exposure cannot be obtained when pressing the shutter button halfway, the display will blink on the LCD monitor.

Shooting

Warning display

Status

 

Action

mode

example (blinking)

 

 

 

 

 

 

 

The subject is too dark.

Increase the ISO sensitivity.

 

60" F2.8

 

Use the flash.

 

 

 

 

P

 

 

 

 

 

 

 

The subject is too bright.

Decrease the ISO sensitivity.

 

 

 

 

4000" F22

 

• Use a commercially available ND

 

 

 

filter (for adjusting the amount of

 

 

 

 

 

light).

 

 

 

 

 

 

 

 

 

The subject is

Decrease the aperture value.

 

30"

F5.6

underexposured.

Increase the ISO sensitivity.

 

 

 

 

A

 

 

 

 

 

 

 

The subject is

Increase the aperture value.

 

 

 

 

 

 

overexposured.

Decrease the ISO sensitivity or

 

4000

F5.6

 

 

use a commercially available ND

 

 

 

filter (for adjusting the amount of

 

 

 

 

 

light).

 

 

 

 

 

 

 

 

 

The subject is

Set the shutter speed slower.

 

4000" F2.8

underexposured.

Increase the ISO sensitivity.

 

 

 

 

S

 

 

 

 

 

 

 

The subject is

Set the shutter speed faster.

 

 

 

 

 

 

overexposured.

Decrease the ISO sensitivity or

 

4000" F22

 

 

use a commercially available ND

 

 

 

filter (for adjusting the amount of

 

 

 

 

 

light).

 

 

 

 

 

 

Information

11

134

*The aperture value at the moment when its indication blinks varies with the lens type and focal length of the lens.

EN