Olympus E-P2 Resetting the camera settings

Resetting the camera settings

In P, A, S, Mor nmode, current camera settings (including any changes you have made) are retained when the power is turned off. To reset the camera to the factory default settings, set [RESET].

Registering [RESET1]/[RESET2]

If settings after a reset are pre-registered to [RESET1]/[RESET2], the camera can be reset to the factory default settings, by executing [RESET1]/[RESET2]. In the nmode, settings corresponding to the nmode are reset.

For details on the registered functions, refer to “Functions that can be registered with My Mode and Custom Reset Setting” (gP. 138).

MENU [W] [CUSTOM RESET]

functions Setup

1 Select either [RESET1]/[RESET2] to register and press i.

• If settings have already been registered, [SET] is displayed next to [RESET1]/[RESET2]. Selecting [SET] again overwrites the registered setting.

• To cancel the registration, select [RESET].

2 Select [SET] and press the ibutton.

Using reset settings

This resets the camera to the factory default settings. You can also reset the camera to the [RESET1] or [RESET2] setting.

[RESET]Resets to the factory default settings. For the default settings, see “Menu directory” (gP. 139).

[RESET1]/[RESET2] Resets to the registered settings.

MENU [W] [CUSTOM RESET]

1 Select [RESET], [RESET1], or [RESET2] and press

the ibutton.RESET1

2 Use fg to select [YES], then press the i

button.

YES

BACK SET